Ultimate Calculator
Math guide

How to calculate percent change

Percent change is (new − old) ÷ old × 100. See worked increase and decrease examples and how percent change differs from percentage points.

Percent change is the difference between the new value and the old value, divided by the old value, times 100. A positive result is a percent increase and a negative result is a percent decrease.

Percent change = (New − Old) ÷ Old × 100

Step by step

  1. Subtract the old value from the new value. This is the change.
  2. Divide the change by the old value.
  3. Multiply by 100 and attach a percent sign.

Example 1: an increase. Rent goes from $1,200 to $1,290.

  1. Change: 1,290 − 1,200 = 90.
  2. Divide by the old value: 90 ÷ 1,200 = 0.075.
  3. Multiply by 100: 7.5% increase.

Example 2: a decrease. A share price falls from $80 to $62.

  1. Change: 62 − 80 = −18.
  2. Divide by the old value: −18 ÷ 80 = −0.225.
  3. Multiply by 100: −22.5%, a 22.5% decrease.

Example 3: more than 100%. Website visits grow from 50 to 175 per day. The change is 125, and 125 ÷ 50 = 2.5, so the increase is 250%. Note that the new value is 3.5 times the old one, not 2.5 times. A 100% increase means doubling, and a 200% increase means tripling.

The percent change calculator runs these steps for any two values.

Applying a percent change

To go the other direction and apply a known percent change, multiply by a single factor:

  • Increase by p%: multiply by (1 + p ÷ 100). Increasing 250 by 12% gives 250 × 1.12 = 280.
  • Decrease by p%: multiply by (1 − p ÷ 100). Decreasing 250 by 12% gives 250 × 0.88 = 220.

For changes in a row, multiply the factors. A 20% rise followed by a 10% rise is 1.20 × 1.10 = 1.32, a 32% total increase, not 30%.

Percent change vs percentage points

When the thing being measured is itself a percentage, there are two honest ways to describe the change, and they give very different numbers.

  • Percentage points are the simple difference between two percentages.
  • Percent change is the relative change, using the formula above.

Example 4. A loan rate rises from 4% to 5%. That is an increase of 1 percentage point. As a percent change it is (5 − 4) ÷ 4 × 100 = 25%. Both statements are true. Saying "rates rose 1%" is ambiguous and should be avoided.

Example 5. Unemployment falls from 6% to 4.5%. That is a drop of 1.5 percentage points, or a percent change of −1.5 ÷ 6 × 100 = −25%.

FromToPercentage pointsPercent change
4%5%+1+25%
6%4.5%−1.5−25%
10%15%+5+50%
50%55%+5+10%

Increases and decreases are not symmetric

A loss needs a larger percent gain to recover, because the gain is measured from a smaller base. If 100 drops 20% to 80, getting back to 100 takes a gain of 20 ÷ 80 = 25%. A 50% loss needs a 100% gain. In general, undoing a drop of p% takes a rise of p ÷ (100 − p) × 100 percent.

Percent change vs percent difference

Percent change compares a before with an after, so there is a clear "old" value. When you compare two values with no natural starting point, such as two shops' prices, some people use percent difference instead: the absolute difference divided by the average of the two values. For 40 and 50 that is 10 ÷ 45 × 100 ≈ 22.2%. It is a different measure, so say which one you are reporting.

Common mistakes

  • Dividing by the new value. For rent going from 1,200 to 1,290, dividing 90 by 1,290 gives about 6.98%, which is wrong. Always divide by the starting value.
  • Adding successive percent changes. Up 10% then down 10% leaves you at 99% of the start, because 1.10 × 0.90 = 0.99.
  • Confusing "times" with "percent increase". Three times as much is a 200% increase, not 300%.
  • Starting from zero. If the old value is 0, percent change is undefined because you cannot divide by zero. Report the absolute change instead.
  • Negative starting values. The formula gives misleading signs when the old value is negative, such as a loss turning into a profit. Describe the change in absolute terms.
  • Mixing up points and percent. If the quantity is a rate or share, state clearly whether you mean percentage points or relative change.

If you only need a part of a whole, rather than a before-and-after comparison, use the percentage calculator.

Common questions

What is the formula for percent change?

Percent change = (new value − old value) ÷ old value × 100. A positive answer is an increase and a negative answer is a decrease.

What is the difference between percent change and percentage points?

Percentage points are the plain difference between two percentages, while percent change is the relative change. Going from 4% to 5% is 1 percentage point but a 25% increase.

Can percent change be more than 100%?

Yes. Any value that more than doubles has increased by more than 100%. A decrease cannot exceed 100% for positive quantities, since a 100% decrease means falling to zero.