Ultimate Calculator
Everyday guide

Metric and imperial conversion guide

A reference for converting between metric and imperial units: key conversion factors, temperature formulas, and the dimensional analysis method.

To convert between metric and imperial units, multiply by a conversion factor: for example, inches × 2.54 = centimetres, and pounds × 0.4536 = kilograms. Temperature is the exception, because it needs a formula with both a multiplication and an offset.

Key conversion factors

To go from the left-hand unit to the right-hand unit, multiply. To go back, divide by the same factor.

QuantityImperial or US unitMetric equivalent
Length1 inch2.54 cm (exact)
Length1 foot0.3048 m (exact)
Length1 yard0.9144 m (exact)
Length1 mile1.609 km
Mass1 ounce28.35 g
Mass1 pound0.4536 kg
Mass1 stone6.350 kg
Volume1 US fluid ounce29.57 mL
Volume1 US gallon3.785 L
Volume1 UK (imperial) gallon4.546 L
Area1 acre0.4047 hectares

Handy reverse factors: 1 cm ≈ 0.3937 in, 1 m ≈ 3.281 ft, 1 km ≈ 0.6214 miles, 1 kg ≈ 2.205 lb, and 1 L ≈ 0.2642 US gallons. The unit converter covers these and many more.

Metric prefixes

Within the metric system, conversions are powers of ten. You only need to move the decimal point.

PrefixSymbolMultiplierExample
kilok1,0001 km = 1,000 m
centic0.011 cm = 0.01 m
millim0.0011 mL = 0.001 L
microµ0.0000011 µg = 0.000001 g

Temperature formulas

Celsius and Fahrenheit have different zero points as well as different degree sizes, so a single multiplying factor will not work.

°F = °C × 9 ÷ 5 + 32
°C = (°F − 32) × 5 ÷ 9
K = °C + 273.15

Worked example 1: oven temperature

A recipe says 350 °F. What is that in Celsius?

  1. Subtract 32: 350 − 32 = 318
  2. Multiply by 5: 318 × 5 = 1,590
  3. Divide by 9: 1,590 ÷ 9 ≈ 176.7 °C (usually rounded to 175 °C or 180 °C on an oven dial)

Worked example 2: room temperature

Convert 25 °C to Fahrenheit.

  1. 25 × 9 ÷ 5 = 45
  2. 45 + 32 = 77 °F

Useful reference points: water freezes at 0 °C = 32 °F and boils at 100 °C = 212 °F, and the two scales meet at −40. For a rough mental estimate, double the Celsius figure and add 30. The temperature converter gives exact values.

Dimensional analysis

Dimensional analysis, also called the factor-label method, is a reliable way to do any conversion, including ones with several steps. The idea is to multiply by fractions that equal 1, arranged so that unwanted units cancel.

Because 1 inch = 2.54 cm, the fraction (2.54 cm ÷ 1 in) equals 1. Multiplying by it changes the units without changing the quantity.

Worked example 3: height in centimetres

Convert 5 ft 10 in to centimetres.

  1. Convert to a single unit: 5 ft × (12 in ÷ 1 ft) = 60 in, plus 10 in = 70 in
  2. 70 in × (2.54 cm ÷ 1 in) = 177.8 cm

The "ft" cancels in step 1 and the "in" cancels in step 2, leaving centimetres.

Worked example 4: miles per hour to metres per second

Convert 65 mph to m/s. Two units need to change, so chain the factors.

65 mi/h × (1,609.344 m ÷ 1 mi) × (1 h ÷ 3,600 s)
  1. 65 × 1,609.344 = 104,607.36 m per hour
  2. 104,607.36 ÷ 3,600 ≈ 29.06 m/s

Miles cancel with miles, hours cancel with hours, and metres per second remain. If the units left over are not the ones you wanted, a fraction is upside down.

Worked example 5: a marathon

A marathon is 26.2 miles. In kilometres: 26.2 × 1.609 ≈ 42.2 km.

Area and volume conversions

For squared and cubed units, the factor must be squared or cubed too. Since 1 ft = 0.3048 m, 1 ft² = 0.3048² ≈ 0.0929 m², and 1 ft³ = 0.3048³ ≈ 0.0283 m³. Likewise 1 m² is 10,000 cm², not 100 cm².

Common mistakes

  • Multiplying when you should divide. Do a sanity check: a kilogram is heavier than a pound, so the number of kilograms should be smaller than the number of pounds.
  • Mixing US and UK measures. A UK gallon is about 20% larger than a US gallon, and UK and US pints and fluid ounces differ too. Fuel economy in miles per gallon is not comparable between the two without converting.
  • Confusing weight ounces with fluid ounces. One measures mass, the other volume.
  • Treating feet and inches as a decimal. 5 ft 6 in is 5.5 ft, not 5.6 ft.
  • Forgetting the 32 in temperature conversions, or applying it in the wrong order. Subtract 32 before multiplying when going from °F to °C.
  • Rounding too early. Keep extra digits through the calculation and round only the final answer.

Common questions

How do I convert inches to centimetres?

Multiply by 2.54. This factor is exact by definition, so 70 inches is exactly 177.8 cm.

What is the formula to convert Fahrenheit to Celsius?

Subtract 32, then multiply by 5 and divide by 9. For example, 350 °F is (350 − 32) × 5 ÷ 9 ≈ 176.7 °C.

Is a US gallon the same as a UK gallon?

No. A US gallon is about 3.785 litres and a UK imperial gallon is about 4.546 litres, roughly 20% larger.